In this news post we cover some of the frequently asked questions on Mechanic In A Bottle.

 Will Mechanic in a Bottle void my warranty?

Mechanic in a Bottle will not void any manufacture’s warranty.

 Can I mix Mechanic in a Bottle in the fuel tank

The mixing ratios that are displayed on the bottle are designed to be mixed in a fuel can. However, if done carefully and the ratios are kept, Mechanic in a Bottle can be mixed in the tank. For example, Preventive Maintenance requires 1 oz of Mechanic in a Bottle. per 5 gallons of fuel. The fuel tank on your trimmer or lawnmower is much smaller so use a capful of Mechanic in a Bottle to the tank.

 What is the shelf life after the bottle is opened?

Our products have a 5 year shelf life even after the container has been opened.

 Will Mechanic in a Bottle hurt my engine?

Mechanic in a Bottle will not hurt your engine, in fact just the opposite. By keeping Mechanic in a Bottle or Ethanol Shield in the fuel at all times, your engine will run cleaner and more efficiently for a longer period of time.

 What happens if I add too much Ethanol Shield or Mechanic in a Bottle to my fuel?

As a general rule, adding a little “extra” Ethanol Shield or MIB will not hurt the fuel. With this said, if a person were to pour a quart bottle into a gallon of gas, the engine will not run properly, and the fuel will need to be diluted with fresh gas. If 4 ounces were added instead of 1 once, this would not be an issue

 Once I pour Mechanic in a Bottle/Ethanol Shield into the tank, how do I prime it when there is no primer bulb?

On equipment that does not have a primer bulb, pulling the starter rope or cranking the engine by turning the key, will work the product into the carburettor. The rope may need to be pulled 15-20 times to ensure that the product has worked its way into the system. On electric start units, only turn the key for no more than 10 seconds at time to keep from burning up the starter. Do this 3-4 times to work the product into the fuel system.

 I have been using other brands or gasoline stabiliser, why should I switch to Mechanic in a Bottle and Ethanol Shield?

Mechanic in a Bottle and Ethanol Shield have been tested by outside testing agencies and has outperformed leading brand competitors hands down. Mechanic in a Bottle is the only product that will allow petrol that is blended with ethanol to keep the 2-cycle oil mix bonded to both the ethanol and fuel.

 Can I use Mechanic in a Bottle and/or Ethanol Shield in my car, truck or motorcycle?

Yes, both Mechanic in a Bottle and Ethanol Shield is safe, and EPA approved for use in cars, trucks, and motorcycles as well as any other petrol engine.

 Will this work with diesel fuel?

No it will not. For diesel applications, use Diesel Mechanic In A Bottle. 

 Will this product clean fuel injectors?

Mechanic in a Bottle will clean and help maintain fuel injectors in automotive, motorcycles and power equipment.